This vintage 1970s Sherwood S-7100 AM/FM Stereo Receiver is a collectible piece of audio equipment from the era. This receiver, made by the brand Sherwood, powers up when plugged in, but that’s all. With its retro design and functionality, this stereo receiver is a nostalgic addition to any vintage audio collection. Perfect for audiophiles looking to enjoy classic music on their vintage stereo system. Item is missing the Power/Loudness knob and only powers up. Sold as pictured.
Item Tag: Sherwood
Vintage Sherwood S-100 CP Stereo Cassette Deck – Power Tested Only Silver Face
Only the functions listed as tested were verified. Any other features should be considered untested. Not Tested.
Related Images:
Sherwood S 8000 III fm 1 Power Transformer 1 Audio Transformer Tested Working
original 👏
Related Images:
SHERWOOD S-1000 II Amplifier Owners Service Manual Photocopy
Item for sale is a SHERWOOD S-1000 II Amplifier Owners Service Manual Photocopy.
Related Images:
Sherwood S1000 II Integrated Amplifier -Vacuum Tube Amp (Working)
WORKING CONDITION.
Related Images:
SHERWOOD S-1000II INTEGRATED AMPLIFIER PARTS/REPAIR
SHERWOOD S-1000II INTEGRATED AMPLIFIER. No accessories. No PO Boxes.
Related Images:
Sherwood S7010 replacement Volume pot control power switch on/off potentiometer
I also have many other controls available. See the ———–> LINK Please note there were several version of a volume pot used by Sherwood. Some are PCB mounted, others stand alone. The pot I offer may be adopted to PCB mount by clipping/sharpening the legs/pins to fit the PCB holes.II have been servicing vintage audio equipment for a while now, and I understand the struggle of finding good volume controls for these units. After years of searching, I decided to take matters into my own hands and re-manufacture volume controls that were used in the golden era of audio equipment. My goal was to produce a high-quality part that is better than the original volume pot, and I am proud to say that I have succeeded. Here are some reasons why you should consider buying our modern production pot instead of fixing the original:Unmatched potentiometer: After 60 years, most vintage volume controls have deteriorated carbon resistance paths that need to be matched and balanced for even sound distribution. If a volume pot is unbalanced, one speaker will sound louder than the other. Our modern production potentiometer has been designed to address this issue, ensuring well-balanced sound.Flawed vintage design: Even if you fix an old control, the result will be short-lived due to significant flaws in the design itself. Our modern production potentiometer has been designed to address these issues, ensuring longevity and consistent performance.As someone who has been restoring vintage audio equipment for years, I can confidently say that these are high-quality factory-made potentiometers that deliver only positive results and well-balanced sound. If you have any questions or would like to purchase a modern production potentiometer for your unit, please don’t hesitate to contact me. Let’s make your gear sing again! We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment
Related Images:
Sherwood S7100a Volume pot control power switch on/off for
I also have many other controls available. See the ———–> LINK II have been servicing vintage audio equipment for a while now, and I understand the struggle of finding good volume controls for these units. After years of searching, I decided to take matters into my own hands and re-manufacture volume controls that were used in the golden era of audio equipment. My goal was to produce a high-quality part that is better than the original volume pot, and I am proud to say that I have succeeded. Here are some reasons why you should consider buying our modern production pot instead of fixing the original:Unmatched potentiometer: After 60 years, most vintage volume controls have deteriorated carbon resistance paths that need to be matched and balanced for even sound distribution. If a volume pot is unbalanced, one speaker will sound louder than the other. Our modern production potentiometer has been designed to address this issue, ensuring well-balanced sound.Flawed vintage design: Even if you fix an old control, the result will be short-lived due to significant flaws in the design itself. Our modern production potentiometer has been designed to address these issues, ensuring longevity and consistent performance.As someone who has been restoring vintage audio equipment for years, I can confidently say that these are high-quality factory-made potentiometers that deliver only positive results and well-balanced sound. If you have any questions or would like to purchase a modern production potentiometer for your unit, please don’t hesitate to contact me. Let’s make your gear sing again! Restoration kits also available.See the ———–> LINK I also have many other controls available. See the ———–> LINK
Related Images:
Sherwood S7100 Volume pot control power switch on/off loudness tap
We also offer lamp & full restoration kits for your unit,See the ———–> LINK I have been servicing vintage audio equipment for a while now, and I understand the struggle of finding good volume controls for these units. After years of searching, I decided to take matters into my own hands and re-manufacture volume controls that were used in the golden era of audio equipment. My goal was to produce a high-quality part that is better than the original volume pot, and I am proud to say that I have succeeded. Here are some reasons why you should consider buying our modern production pot instead of fixing the original:Unmatched potentiometer: After 60 years, most vintage volume controls have deteriorated carbon resistance paths that need to be matched and balanced for even sound distribution. If a volume pot is unbalanced, one speaker will sound louder than the other. Our modern production potentiometer has been designed to address this issue, ensuring well-balanced sound.Flawed vintage design: Even if you fix an old control, the result will be short-lived due to significant flaws in the design itself. Our modern production potentiometer has been designed to address these issues, ensuring longevity and consistent performance.As someone who has been restoring vintage audio equipment for years, I can confidently say that these are high-quality factory-made potentiometers that deliver only positive results and well-balanced sound. If you have any questions or would like to purchase a modern production potentiometer for your unit, please don’t hesitate to contact me. Let’s make your gear sing again! We also offer lamp & full restoration kits for your unit, See the ———–> LINK We might be interested in buying your equipment. Please let us know if you have any for sale.
Related Images:
Volume pot control power switch on/off for Sherwood S7210 potentiometer
I also have many other controls available. See the ———–> LINK I have been servicing Sherwood units for a while. With years I’ve developed deep respect toward Sherwood gear (especial tube gear). It is a pity to see how many units arewasted/mutilated (drilled holes in the faceplate or chassis for a toggle switch installation, cord cutting for in-line switches etc), just because of the broken on/off switch! After many years of back and forth I decided to re-manufacture many of Sherwood volume controls that were used back in the days. My main goal was to produce a highquality part that is better in comparison to the original volume pot.I am glad to announce that I succeeded. I am very happy with the result and am sure you will be too!This is modern production potentiometer. An exact copy of the original pot, but much better in terms of reliability and quality.The original on/off switch cap fits the back of this pot, so that the gray on/off switch will be covered (Please see it demonstrated in the attached image) Please note the cap used for demo is not included in the auction. WORD OF CAUTION: For those of you who are considering altering the unit (drilling holes in the faceplate/chassis for a toggle switch or adding an inline switch by cutting the power cord)I would say STOP! Such alteration of the faceplate/chassis or the cord will play a significant role in how much you can sell the unit for in the future! DO NOT ALTER YOUR UNIT!!!Any such alteration will decrease the value of the unit by at least double the amount you spend on this new potentiometer. Down the road you will want to sell the unit and any alteration (such as, mentioned above) will devalue it significantly. Specs: Resistance: 100K each Tap type: Audio Loudness tap: 35K On/OFF switch: can sustain up to 6A current. Compatible with models: Sherwood S7210Knob fit: Some Sherwood models came with knurled knob. This half moon shaft tip fits the knurled knob well. Here are couple of points why one would be better off buying modern production pot for his/her Sherwood receiver: 1. Many original volume controls that Sherwood used came with huge design flaws: a. Notoriously unreliable on/off switch. Experience has shown time and again that by now more than 75% of those switches have failed and the other 25% is one foot in the grave. Very often I have customers who tell stories of a receiver turning itself on while the power switch is in off position. The reason for this is the faulty switch that shorts and causes the unit to turn itself on. Now just think about it! What if one is not home when a tube receiver/amp comes live! Definite fire hazard!!! b. Unmatched potentiometer. By now the majority of 60-year-old volume controls have deteriorated carbon resistance paths. Those must be matched and balanced because they play a huge role in even sound distribution. If a volume pot is unbalanced one speaker will sound louder than the other! Even if one fixes an old switch/pot or buys NOS, the result will be short lived due to huge flows in the design itself. All these issues have been addressed by this volume control. These are high quality factory made potentiometers. I use these controls when restoring customers’ Sherwood units. Only positive results and well balanced sound. I see many posts on various forums where people are looking/asking for a good replacement.I have a limited quantity. Will keep few for myself and help others with this hard to find pot. Please let me know if you have any questions. Thank you and let’s make your Sherwood sing again!!! Restoration kits also available.See the ———–> LINK I also have many other controls available. See the ———–> LINK Returns:If, for any reason, you do not like this pot, I would be glad to accept it back and even pay for the return shipping fee! FeedbackFrom BuyerDate/timevery fast service, exactly as discribed.6***o( 354)2018-05-25 20:17:36