Up for sale here is this set of 4 new wired grain-of-wheat light bulbs. They are perfect for replacing all four of the bulbs in a Yamaha CR-400, CR-450, CR-600, CR-620, CR-800, CR-820, or CR-1000. They will replace the four meter bulbs and one tuning needle bulb. Specs:Type: IncandescentVoltage: 12v AC/DCCurrent Draw: 70mAColor: Warm WhiteWire Length: 7 inches (178mm)Bulb Diameter: 3.8mmBulb Length: 8.7mmPolarity: Non-polar Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
Item Tag: Replacement
New 5B1 5B2 5B4 Bridge Rectifier Replacement KIT
This lets you replace the original underpowered 5B2 bridge rectifier and attached. 022 uf capacitors. You just need to assemble it, which is simple. The actual bridge rectifier used in this is rated at 25A 800v, but that’s with an attached heat-sink, so it’s not going to be good for that much power here.
Related Images:
NEW Replacement Grill KLH Model Twenty One FM AM/FM Radio Black Fabric VTG
Custom made grill and backer to fit the KLH Model Twenty One FM and Twenty One AM/FM radios with vinyl veneer cabinets. It does not fit the earlier KLH 21 radios with wood cabinets. This grill is made from a rigid MDF backer and has deep black acoustically transparent fabric attached.
Related Images:
New Replacement Kit for 20 + 20 + 10 + 10 uf 450v Quad Can Capacitor
Up for sale here is this kit to allow you to replace a 20 uf/20 uf/10 uf/10 uf 450v quad (4-section) can capacitor. You will receive two (2) new 22 uf 450v Supertech radial capacitors, two (2) 10 uf 450v Supertech radial capacitors, and one (1) 5-lug terminal strip. You can mount the terminal strip under the chassis, attach the capacitors to it, and then attach the various wires and resistors from your equipment, giving you the equivalent of the original can capacitor, without worrying about gutting it or searching around for new old stock cans. This isn’t that hard to install, but you should know what you’re doing and have a decent soldering iron. Please see my pictures for details. If you’d like a custom can capacitor replacement kit instead, I have a listing here where you can custom-design whatever you’re looking for. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.
Related Images:
3 NICE Replacement Wedge Lamp Socket Pioneer SX-3700 SX-3800 SX-3900
Up for sale here is this set of 3 new wired wedge lamp sockets. These will fit the holes in the light diffuser, and will work perfectly.They are a little snug in the light diffuser holes, but will fit, you just have to squeeze them in a little.
Related Images:
New SS-3 & SS-3R Dual Diode Replacement Kit SS-5 SS-5R S5151 S5151R
This will replace the SS-3, SS-3R, SS-5, SS-5R, S5151, S5151R, and anything similar. This is the neatest little adapter board! It is marked for common cathode (SS-3, S5151, etc) on one side and common anode (SS-3R, S5151R, etc) on the other side.
Related Images:
10 New Replacement Neon Bulbs for Phono Strobe Turntable Light Lamps
If you connect these bulbs directly to 120VAC they will die. I have single bulbshere if you only need one. Looking for more parts?.
Related Images:
Bose 301V Speaker Woofer Replacement New Driver Free Shipping
Up for sale 1 Brand New 8″ inch Heavy Duty Woofer Home Speaker 8 Ohm 75 Watt. Rubber surrounds used in High End speakers always sounds better then foam surrounds and lasts much longer then foam. Plus, why spend all that time and labor gluing the same foam problem in place when changing the whole woofer takes just a minute or two and you’re up and running right now with great deep rich sound. This makes a great replacement for Bose 301V Speaker Woofer and will make your speakers sing a new tune. Free Shipping!
Related Images:
Infinity SM-122 Speaker 12″ Woofer Replacement New Driver Free Shipping
Rubber surrounds always sounds better then foam surrounds and lasts much longer then foam.
Related Images:
Reel to Reel Power Cord A/C Cable Replacement Teac Akai Pioneer 20′ AC POWER IN
20ft Custom Power Cord – Fits 2-Prong Reel-to-Reel Tape Decks (Teac, Pioneer, Sony, Sansui). This is a practical alternative to the now-obsolete OEM cords. 20 ft length. With a full 20 feet of reach, you can place your tape deck wherever it works best—no daisy-chaining needed.