Item Tag: Pioneer SR-303

PIONEER SR-303 REVERB PARTS – RCA jack

CLASSIC STEREO PARTS Some of the parts from this model are not listed on eBay. Please email and if we have the part you seek we will list it on eBay and send you the link. Description: PIONEER SR-303 REVERB PARTS – RCA jack Condition: good Warranty: This part is guaranteed to be 100% operational or we will refund your payment including shipping. Parts Availability: To see other parts from this model in our eBay store click here. Parts Substitution: If the part you need looks exactly like the one in the photo and you need more information to make a match please contact us. We will do our best to help with measurements, values, etc. Payment & Shipping: Most items can be packed together to save on shipping. Any excess shipping over $1 will be refunded after payment is made. Our Promise: We want you to be 100% satisfied with your purchase. We value your business both now and in the future. If you have any question or concern please contact us and we will do our best to help. We try our best to evaluate the condition of all the equipment and parts we sell on Ebay. Classic Stereo Parts (Hot Potato Marketing) assumes no liability for damage or injury to property or persons resulting from the use or installation of any equipment or part we sell. We Appreciate Your Business!

Related Images:

Pioneer SR-303 Lot of 8 White Plastic Rivets & Sockets – Vintage Parts

Up for sale here is this set of 8 white plastic rivets and sockets from a Pioneer SR-303 reverb. They are in good condition and will work fine. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. I have more SR-303 parts and other vintage electronics listed–feel free to take a look!

Related Images:

3 SETS! Black Walnut Rails Pioneer RG-2 RG-60 RG-70 RG-9 SR-303 SR-60 SR-70 SR-9

THREE (3) SETS!!! At a discount price! Black Walnut Side Rails for your Pioneer Signal Processor Made to exacting standards by hand in the USA using only the highest quality solid Black Walnut. Give your Classic Pioneer Signal Processor a facelift! These Solid Black Walnut Side Rails give you Pioneer a splash of class that it deserves. Nothing looks better than Walnut and Silver. The rails are held in place with super-strong 3M double-sided tape. Of course the 3M tape is included – and pre-installed for your convenience. Easy as pie to install. Peel the red tab protective cover from the 3M tape (tab shown in close-up picture).Slide the rail over your faceplate – positioning it evenly with the top of the faceplate.Press firmly so the tape attaches to your unit (it sticks to the side of the case – NOT the silver face).Enjoy the new look! As easy to remove too: Just pull the rails and the tape will release. Which Pioneer Components will these Side Rails fit? This rails in this listing fit the following Pioneer Components:Pioneer RG-2 Dynamic Processor (shown in the pictures)Pioneer RG-60 Dynamic ProcessorPioneer RG-70 Dynamic ProcessorPioneer RG-9 Dynamic ProcessorPioneer SR-303 Reverberation Amplifier (shown in the pictures)Pioneer SR-60 Reverberation AmplifierPioneer SR-70 Reverberation AmplifierPioneer SR-9 Reverberation AmplifierPlease keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. What you will receive:Six (6) side rails (cheeks) made from Black Walnut Hardwood.3M double-sided tape on both rails (already attached). Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. Check my feedback and bid with confidence. The PIONEER Components shown in the Listing Pictures ARE NOT INCLUDED!

Related Images:

Pioneer SR-303 PARTIAL capacitor rebuild restoration kit repair filter

Please note we also offer a FULL kit with INSTRUCTIONS ———–> LINKOr search for item (eBay item number:156278503146)The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Panasonic / United Chemi) electrolytic capacitors.2. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors.3. Parts for compete recap of all the electrolytic capacitors. 4. Complete recap of all PCBs. 5. Transistors (PNP, NPN). 6. fuse/s 7. Diodes Please note this kit does not come with any instructions. If you need instructions, see the link below for a full kit. A FULL kit with INSTRUCTIONS & SUPPORT ———–> LINK We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

Pioneer SR-303 Original Bulb Resistor 1000J

Pioneer SR-303 Original Bulb Resistor. This is for resistor used for controlling the flashing lights in a SR303. This came out of a working SR-303 that was upgraded to LEDs Interested in upgrading your unit to LEDs check out my listing for all the lights and resistors you need Will combine shipping when more then one is ordered. Shipping will be just 5$ despite how many you order.

Related Images:

Black Walnut Rails Fits Pioneer RG-2 RG-60 RG-70 RG-9 SR-303 SR-60 SR-70 SR-9

Black Walnut Side Rails for your Pioneer Signal Processor Made to exacting standards by hand in the USA using only the highest quality solid Black Walnut. Give your Classic Pioneer Signal Processor a facelift! These Solid Black Walnut Side Rails give you Pioneer a splash of class that it deserves. Nothing looks better than Walnut and Silver. The rails are held in place with super-strong 3M double-sided tape. Of course the 3M tape is included – and pre-installed for your convenience. Easy as pie to install. Peel the red tab protective cover from the 3M tape (tab shown in close-up picture).Slide the rail over your faceplate – positioning it evenly with the top of the faceplate.Press firmly so the tape attaches to your unit (it sticks to the side of the case – NOT the silver face).Enjoy the new look! As easy to remove too: Just pull the rails and the tape will release. Which Pioneer Components will these Side Rails fit? This rails in this listing fit the following Pioneer Components:Pioneer RG-2 Dynamic Processor (shown in the pictures)Pioneer RG-60 Dynamic ProcessorPioneer RG-70 Dynamic ProcessorPioneer RG-9 Dynamic ProcessorPioneer SR-303 Reverberation Amplifier (shown in the pictures)Pioneer SR-60 Reverberation AmplifierPioneer SR-70 Reverberation AmplifierPioneer SR-9 Reverberation AmplifierPlease keep in mind that wood varies in appearance. The item you get may vary slightly than the samples depicted in the ad. What you will receive:Two (2) side rails (cheeks) made from Black Walnut Hardwood.3M double-sided tape on both rails (already attached). If you need more than 1 set, see my other eBay listing for a TWO sets! If you need more than 2 sets, message me through the eBay system and I will get you what you need. Rails available for other Pioneer components also.Other wood types available too. Click on “See Other Items” under Seller Info at top to check out all my listings. Check my feedback and bid with confidence. The PIONEER Components shown in the Listing Pictures ARE NOT INCLUDED!

Related Images: