Item Tag: pioneer rg-1 dynamic

Pioneer RG-2 Dynamic Processor Warranty Card *Original*

This is a an Original, Physical Document. -Professional offset printing means ultra-sharp and easily readable text and graphics. -Original manuals often contain large fold-out schematics. -An original service manual usually pays for itself within the first few hours of working on your equipment! Condition: This is an ORIGINAL PHYSICAL DOCUMENT, not a photocopy, reprint or digital version. There may be some wear & tear since most of these are decades old. Tech’s notes are occasionally written inside the manual, they are often helpful hints and tips or prices / etc. Searching for a different manual? We have a collection of more than 15,000 original owners manuals, service manuals, and original dealer literature. Use the search feature to search for your make and model. Shipping: Item will be carefully packed with a cardboard backing and sealed in a waterproof shipping envelope. Combined shipping: If you’d like to buy more than one item, we can usually combine shipping. Send us a quick message and we’ll setup the transaction.

Related Images:

Pioneer RG-9 Dynamic Processor Ultimate Upgrade Kit Genuine Parts Restoration

This is a Restoration kit for the Pioneer RG-2 Dynamic Processor. This kit includes caps for ALL boards Easy to install, this kit replaces all electrolytic capacitors. Bad capacitors are a primary cause of problems. Includes digital access to both the service and owner’s manual. The kit replaces electrolytic and tant caps with high quality new ones sourced via reputable USA distributors like Digikey and Mouser. Caps are Nichicon high quality UKL and UPW capacitors, Any capacitor of 4.7uf or lower is replaced with a high quality Wima film caps for better sound and reliability. Transistors are also sourced the same way and almost all are highly reliable on-semi devices. Not all (not even most) transistors get replaced, just those that time and collective knowledge have shown to be either noisy, unreliable or at the edge of their operating ability. Trimmers are supplied by bourns The individual doing the work should be competent with a soldering gun, multimeter, reading a schematic etc. I am not a tech, but I have successfully done hundreds of restorations over the last 20 years. Many of the parts lists for these kits were compiled when we restored units, others are sourced from the service manuals (digital download included in purchase if you don’t know how to source it). We have compiled parts lists for well over 200 units for units from Marantz, Technics, Pioneer, Sansui, Harman Kardon, etc. We do not sell kits for tube gear currently. If the service manual is wrong (it does happen) we will ship you out the correct parts free of charge. The same is true if we make a mistake in compiling the kit ( I hope not but just in case). We want this process to go smoothly for you. Included is a two page instruction/guidance sheet with some helpful hints. It is not a step by step guide. But, with it, the service manual, our part number labeled parts list you will have everything you need to get the job done. The kit will ship (usually the next day) via USPS First Class with tracking. We have bought in bulk hoping to provide the community with an easy, time and cost effective solution. Any feedback on how to do that better is appreciated. Thank you________More Details____ Quality PartsAll signal path caps 4.7uf or lower are replaced by sonically superior film caps, most by WimaAll transistors are made by OnSemiElectrolytic caps are primarily Nichicon. Panasonic, United Chem-Con and other reputable brands are also employedNichicon caps used are primarily from the UPW and UKL linePanasonic caps used are primarily from the FC & FR lineRelays are primarily OmronTrimmer are made by BournsAll Parts Are Procured Directly through the Manufacture or via Authorized DistributorsHIghest QualityNo Counterfeit PartsUltimate Kits include the following*Replacement Caps for every electrolytic or tantalum cap in the unit, including tuner sectionsUnless otherwise noted, this includes any off board capacitors including the Filter and Coupling CapsOff Board caps may be smaller in diameter than the originals, our documentation provide a few easy options for installing theseReplacement Trimmers for critical audio adjustments like bias and dc offset (where applicable in amplifiers and receivers). Other Kit supplier do not include these. Replacement Relay where applicable*Not all units use a relay, not all vintage relays have a modern replacement, and finally not all vintage relays can be ascertained from available dataKits are priced accordingly, you can view our parts list to see if your kit includes the relay(s).Replacement Transistors and diodes for those we now know were problematic*Not all transistors and diodes are replaced, nor should they be. Our Parts List shows all the transistors and diodes includedMany units made after around 1982 have few or none of these problematic transistorsIncluded Documentation (PDF format)Our Parts List (separated by board and part type – easy to comprehend)The Service Manual (or at least the schematic if we can’t locate the full service manualOur exclusive and extensive Hints & Instructions DocumentThe Owner’s Manual (if available)The Kit Parts are separated and bagged by boardShipped promptly in quality boxesDocumentation links are sent via message, email and included in the kitNeed a Kit for Something Not Yet Listed?Have Questions?Contact us

Related Images:

Pioneer RG-60 Dynamic Processor Ultimate Upgrade Kit Genuine Parts Restoration

This is a Restoration kit for the Pioneer RG-60 Dynamic Processor. This kit includes caps for ALL boards Easy to install, this kit replaces all electrolytic capacitors. Bad capacitors are a primary cause of problems. The kit replaces electrolytic and tant caps with high quality new ones sourced via reputable USA distributors like Digikey and Mouser. Caps are Nichicon high quality UKL and UPW capacitors, Any capacitor of 4.7uf or lower is replaced with a high quality Wima film caps for better sound and reliability. Transistors are also sourced the same way and almost all are highly reliable on-semi devices. Not all (not even most) transistors get replaced, just those that time and collective knowledge have shown to be either noisy, unreliable or at the edge of their operating ability. The individual doing the work should be competent with a soldering gun, multimeter, reading a schematic etc. I am not a tech, but I have successfully done hundreds of restorations over the last 20 years. Many of the parts lists for these kits were compiled when we restored units, others are sourced from the service manuals (digital download included in purchase if you don’t know how to source it). We have compiled parts lists for well over 200 units for units from Marantz, Technics, Pioneer, Sansui, Harman Kardon, etc. We do not sell kits for tube gear currently. If the service manual is wrong (it does happen) we will ship you out the correct parts free of charge. The same is true if we make a mistake in compiling the kit ( I hope not but just in case). We want this process to go smoothly for you. Included is an instruction/guidance document packed with helpful hints. It is not a step by step guide. But, with it, the service manual, our part number labeled parts list you will have everything you need to get the job done. The kit will ship (usually the next day) via USPS First Class with tracking. Thank you________More Details____ Quality PartsAll signal path caps 4.7uf or lower are replaced by sonically superior film caps, most by WimaAll transistors are made by OnSemiElectrolytic caps are primarily Nichicon. Panasonic, United Chem-Con and other reputable brands are also employedNichicon caps used are primarily from the UPW and UKL linePanasonic caps used are primarily from the FC & FR lineRelays are primarily OmronTrimmer are made by BournsAll Parts Are Procured Directly through the Manufacture or via Authorized DistributorsHIghest QualityNo Counterfeit PartsUltimate Kits include the following*Replacement Caps for every electrolytic or tantalum cap in the unit, including tuner sectionsUnless otherwise noted, this includes any off board capacitors including the Filter and Coupling CapsOff Board caps may be smaller in diameter than the originals, our documentation provide a few easy options for installing theseReplacement Trimmers for critical audio adjustments like bias and dc offset (where applicable in amplifiers and receivers). Other Kit supplier do not include these. Replacement Relay where applicable*Not all units use a relay, not all vintage relays have a modern replacement, and finally not all vintage relays can be ascertained from available dataKits are priced accordingly, you can view our parts list to see if your kit includes the relay(s).Replacement Transistors and diodes for those we now know were problematic*Not all transistors and diodes are replaced, nor should they be. Our Parts List shows all the transistors and diodes includedMany units made after around 1982 have few or none of these problematic transistorsIncluded Documentation (PDF format)Our Parts List (separated by board and part type – easy to comprehend)The Service Manual (or at least the schematic if we can’t locate the full service manualOur exclusive and extensive Hints & Instructions DocumentThe Owner’s Manual (if available)The Kit Parts are separated and bagged by boardShipped promptly in quality boxesDocumentation links are sent via message and included in the kitNeed a Kit for Something Not Yet Listed?Have Questions?Contact us

Related Images: