Item Tag: For Pioneer

3 New Replacement Wedge Lamp Sockets Pioneer SX-680 SX-780 SX-880 SX-980 SX-1080

Up for sale here is this set of 3 new wired wedge lamp sockets. These are perfect replacements for the sockets in the Pioneer SX-450, SX-550, SX-650, SX-750, SX-580, SX-680, SX-780, SX-880, SX-980, and SX-1080, among others. They are brand new sockets, so you can replace all of your old broken plastic sockets. These will fit the holes in the light diffuser, and will work perfectly. I sell the wedge-lamps for these too, just search my listings for “wedge” and they’ll all come up. I have incandescents and LEDs available, and I have lots of colors for the LEDs. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the “add to cart” feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

Related Images:

Pioneer XL-1550 turntable inscription on the plinth

Dear everyone. I am selling the inscription on the casing of the Pioneer XL-1550 “PIONEER Quartz PLL MODEL XL-1550” The inscription is applied to a special transport foil that we remove after applying the inscription. Application of the inscription is easy, after application the inscription is durable and waterproof. Can be applied to most surfaces. 1. Clean and degrease the place where you will stick the inscription. 2. try to write vertically and horizontally (it is best to use an additional tape that will serve as a marker for a straight line). 3. Separate gently the labeled transparencies from the white paper. 4. Grasp the 2 ends of the foil so as not to touch the adhesive side. 5. Slowly put the foil against the plinth. (ATTENTION AT THIS STAGE, YOU CANNOT MISTAKE – THE MESSAGE STICKS AFTER CONTACT WITH THE HOUSING, IT CANNOT BE CORRECTED) 6. After application, press the foil with the inscription quite strongly with your finger 7. Wait 5-10 minutes and then peel off the transport foil very slowly (WE TIP THE FOILS SLOWLY AT A LARGE ANGLE). If you have a question about how to apply the inscription, feel free to contact me. My daily job is to renovate turntables and I know from experience that plastic parts can break. Unfortunately, after 50 years, spare parts for some turntables are not available. That’s why I decided to create them from scratch and share them with you. In my auctions you will find various spare parts for brands such as: Pioneer Yamaha Mikroseiki Victor JVC Denon Diatone Kennwood and other. If the item you are looking for is not available at auctions or you have any questions, please email me. I can make various elements for turntables. Good luck.

Related Images:

Pioneer Speaker Badge Emblem Logo Pair Custom Made – Brushed Gold

Please Read The Entire Description Free Shipping DoesNOTInclude Tracking These badges are custom made with premium 1/16″ plastic, measure approximately 2-3/16″ by 3/8″, and have a permanent mat black and brushed gold finish. Each badge comes with an adhesive backing already applied. Just peel off the back, and it’s ready to apply. This listing is for two (2) individual badges. *** Free shipping is through USPS first class stamp mail, and there is no tracking. If you would like tracking, please select USPS Ground Advantage, and you will need to pay for shipping. *** Custom orders and colors are available upon request.

Related Images:

Pioneer Equipment Badge Logo Gold Incised Plastic SMALL 36mm x 6mm

These badges are made of 1/16″ thick gold and black laminated plastic and have been custom cut by a CNC machine. Each badge measures approximately 36mm long and 6mm tall (1-3/8″ x 1/4″). They can be attached to your equipment using any type of glue or adhesive of your choosing (not supplied with the badges). The price listed is for one badge as shown. Free domestic shipping via USPS First Class mail (stamped envelope – no tracking) or choose USPS First Class small package if a tracking number is desired. International shipping via USPS First Class international letter (no tracking) is $2.00.

Related Images: