Item Tag: Dynaco

NOS 3-Socket RCA Phono Input/Output Jack Strip – $2.00/ea

You are bidding on (1) NOS 3-socket phono input/output strip, black color, brand new, never used. Center to center mounting hole dimensions are: 0.500″ top to bottom and 1.625″ side to side. Vintage Electron Inc. possesses the largest inventory of NOS Dynaco parts available anywhere in the world, having purchased both the remaining warehouse inventory of the old Sound Values/Stereo Cost Cutters Inc. (SV/SCC) operation as well as the remaining inventory of the old Dynaco National Service Center. SV/SCC was the company that purchased nearly 250,000 pounds of Dynaco parts when Dynaco closed it’s doors back in 1979; they also purchased the existing Hafler inventory from the Rockford Fosgate Corporation back in the early 1990‘s. Quantities of some parts (both Dynaco and Hafler) are very limited as can be expected. Vintage Electron Inc. has no affiliation with the old SV/SCC company and we do not provide repair services at this time for any of the Sound Valves brand products. Please visit our store and search under the Dynaco section for Dynaco items, search under the Hafler section for Hafler items, and search under the Sound Valves section for Sound Valves items. Thanks for looking at our listing and be sure to check out our other listings and auctions for other items of interest. (D355003) SPECIAL OFFER – FREE brand new VE Tube Pin Straightener (Made In USA) for all orders over $300!!! Works with 7 pin miniature, 9 pin miniature, 10 pin miniature, Magnoval, Novar, and Compactron tubes. Also available for individual sale, please visit our store and search for Tube Pin Straightener.

Related Images:

Dynaco SCA-35 restoration rebuild kit repair service fix capacitor

The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic, paper, film, oil capacitors. Do not fall for partial kits. This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. Note, the image with silver multicap cans shown restaffed with new caps is for illustration purpose only. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics (all of these are in electronic form, I consider these much better than printed version due to zoom availability).4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all oil, film, paper, lytic caps. 7. fuse/s 8. Instructions on how to clean the chassis. 9. Instructions on how to clean a faceplate 10. Instructions on how to polish knob covers. 11. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

Dyna Dynaco PAS 2 Stereo Tube PreAmplifier Functions Missing One Knob See Image

The Dyna Dynaco PAS 2 Stereo Tube PreAmplifier is a vintage audio device known for its high-quality sound and functional performance. This preamplifier, made by the reputable brand Dynaco, is designed to enhance the audio signal before it reaches a power amplifier, resulting in improved sound quality. The PAS 2 model is a sought-after piece for collectors and audiophiles looking to add a touch of nostalgia and classic sound to their audio setup.

Related Images:

Dyna Tuner FM-1 Early Vintage Tube Radio, Made in USA

Dyna tuner fm-1 tube radio tuner. Really clean and working and sounding great! Shipping will be $45. If it’s more than that I’ll cover it. If it’s less I’ll refund the difference. I hate sellers that rip you off on shipping!! And due to scamming A-HOLES, this is being sold as is. There will be no refunds partial or otherwise. But don’t worry. You’re gonna LOVE it! It really does sound WONDERFUL!! I took a video of it working but couldn’t figure out how to upload it. I’ll keep trying. If you see it, you’ll know I figured it out! Edit: I FIGURED IT OUT!! Oh and check out my other auctions for the dynaco preamp and ST-70 stereo amp. Both in really nice and working condition.

Related Images:

DYNACO ST-70 6GH8 Stuffed Driver board PC-3 PCB + matched pair 6GH8A EI Philips

DYNACO ST-70 6GH8A / 6GH8 COMPLETE STUFFED PC-3 DRIVER BOARD WITH TUBES (NOS Platinum matched pair of 6GH8A EI Philips) This is Dynaco ST-70 driver board PC-3. It’s developed and designed to be drop in replacement and it follows original wire hole layout, but it’s modified to use widely available 6GH8 / 6GH8A / 6KD8 / ECF82 tubes instead of obsolete and hard to find 7199 tubes. You can find many quality NOS tubes of any of these types for normal prices and you can enjoy tube rolling with this driver board. It’s also modified to accept modern and NOS coupling capacitors of various types and dimensions.It’s made of hi quality epoxy fiberglass FR4 material 1.6mm (0.062’) thickness, it’s double sided with solder rings on top layer. Solder reflow process is done on both layers and also inside every hole and blue solder mask is applied on both sides. All connections and elements on the board are silkscreened with original DYNACO numbering, so you can use original DYNACO ST-70 manual to complete it.This is complete board! One brand new PCB, ceramic sockets, WIMA MKP coupling capacitors, silver mica capacitors, metal film, metal oxide and carbon oxide resistors and one NOS matched pair (two tubes) of 6GH8A EI Philips. They are made back in 80s in EI tube factory, under Philips licence and with some of genuine Philips materials. They were intended for export, so they have passed strict quality control. Every pair is selected from the same batch with same date codes and tubes are real platinum matched pairs, tested on my calibrated METRIX U61-B tester. All coupling capacitors are high quality WIMA MKP Metallized Polypropylene (PP) Capacitors. 120nF are used vs original 100nF, for a bit better bass response.Also silver mica capacitors are used, metal film, metal oxide and carbon resistors for good performance and lowest hum.Without printed DYNACO manual, but I can send pdf by email!!!Please note that I’m responsible for board and tubes only, and once soldered to, all warranties and guarantees are voided except where the quality of the board, components on the board and tubes. DYNACO ST-70 Stereo 70 ST70 – 6GH8A 6GH8 PC-3A DRIVER BOARD COMPLETE STUFFED BOARD (Brand NEW STUFFED PCB + NOS NIB MATCHED PAIR 6GH8A EI PHILIPS) I collect tubes and tube gear for more then 30 years and I start to sell recently, please be sure to check my other items and visit my store for more rare NOS tubes and parts.If you buy any item on ebay from me and for if you are not fully satisfied for any reason or have any complains, please send me message before leaving negative or neutral feedback or opening a case. I really do care about your satisfaction and I’ll do my best to solve any kind of problem.I have more than 200000 NOS tubes in stock and just small part is listed here, if you are interested in any specific tube or part, please send me message.

Related Images:

DYNACO ST-70 6GH8 6GH8A ECF82 Driver board PCB PC-3 KIT Dyna ST70

DYNACO ST-70 6GH8A / 6GH8 PC-3 DRIVER BOARD PCBThis is Dynaco ST-70 driver board PC-3. It’s developed and designed to be drop in replacement and it follows original wire hole layout, but it’s modified to use widely available and better sounding 6GH8 / 6GH8A / 6KD8 / ECF82 tubes instead of obsolete and hard to find 7199 tubes. You can find many quality NOS tubes of any of these types for normal prices and you can enjoy tube rolling with this driver board. It’s also modified to accept modern and NOS coupling capacitors of various types and dimensions.It’s made of hi quality epoxy fiberglass FR4 material 1.6mm (0.062’) thickness, it’s double sided with solder rings on top layer. Solder reflow process is done on both layers and also inside every hole and blue solder mask is applied on both sides. All connections and elements on the board are silkscreened with original DYNACO numbering, so you can use original DYNACO ST-70 manual to complete it. DYNACO ST-70 Stereo 70 ST70 – 6GH8A 6GH8 PC-3A DRIVER BOARD PCB I collect tubes and tube gear for more then 35 years and I start to sell recently, please be sure to check my other items and visit my store for more rare NOS tubes and parts.If you buy any item on ebay from me and for if you are not fully satisfied for any reason or have any complains, please send me message before leaving negative or neutral feedback or opening a case. I really do care about your satisfaction and I’ll do my best to solve any kind of problem.I have more than 250000 NOS tubes in stock and just small part is listed here, if you are interested in any specific tube or part, please send me message.

Related Images: