Item Tag: AS2.0

2 set Phono Cartridge Headshell Lead Wires silver Made in Italy Audiosilente

THE AUCTION IS FOR 2 set of AUDIOSILENTEHEADSHELL LINK CABLE SET.wires High purityoxygen free copper silver platedTHE CONNECTION CLIPS ARE PRODUCED BY AUDIOSILENTE.IN PHOSPHOR BRONZE , HIGH ELASTIC MATERIALREAL GOLD PLATED 5 MICRON 24 KTHEY ACCEPT DIAMETER 1.18MM TO 1.22MM SO THEY ARE PERFECT FOR MOST CARTRIDGESFOR EXAMPLE BENZ FR LYRA AUDIOTECHNICA. THE CONNECTION OF WIRES WITH CLIPS FEMALE IS SOLDERED WITH TIN ( 4 % SILVER ). HAND MADE ONE FOR ONE. THE BEST CONDUCTION IS WITH SOLDERING AND NOT WITH CRIMPING .MADE IN ITALYAUDIOSILENTE.

Related Images:

100 CARTRIDGE CONNECTOR CLIPS GOLD PLATED 24k TONEARM HEADSHELL ITALY 1.20 mm

THE AUCTION is FOR 100 PCS CLIPS.With a very pleasure I annouce the production of CLIPS GOLD PLATED. SIZE 1.2MMthe best clips female for your tonearms and headshells.THEY ACCEPT THE DIAMETER PIN MALE.1.17 TO 1.23 MMSO THEY ARE PERFECT FOR THE MOST CARTRIDGES.FOR EXAMPLE BENZ , FR , LYRA, AUDIOTECHNICA.PRODUCED BY AUDIOSILENTE ITALY.THE TOTAL LENGTH IS 7.80 mm. PERFECT LENGHT FOR THE CLIPS FEMALE.THE INSIDE PART OF FEMALE CLIP IS LENGHT 4.5 MMTHE RANGE OF LENGHT OF PINS MALE CARTRIDGES IS 3.00 TO 4.5MMSO IT IS PERFECT.WE HAVE STUDIED FOR 6 MONTHS BEFORE START THE PRODUCTION.EVERY PART IS STUDIED. FOR EXAMPLE THE CONNECTION MUST BE ONLY WITH SOLDERING . ONLY IN THIS MODE YOU HAVE PERFECT CONNECTION. THE MATERIAL IS PHOSPHOR BRONZE , HIGHT ELASTIC MATERIAL.REAL GOLD PLATED. LOOK THE PHOTOS.THE GOLD PLATED TREATMENT IS THE BEST.THE SILVER OXIDIZES, THE GOLD NOT. CLIPS GOLD PLATED. SIZE 1.2MMITALYAUDIOSILENTE THE CARTRIDGES IN THE PHOTOS ARE NOT INCLUDEDonly 100 CLIPS FEMALE GOLD PLATED. Audiosilente Italian quality

Related Images:

Thorens 124 new 2 sintered bronze bushings for STEPPED PULLEY – Audiosilente

Audiosilente ItalyNEW sintered bronze bushings for Thorens 124 STEPPED PULLEY – Impregnated with Shell turbine oil and made to an impressive production tolerance of 0,005 millimeters! 2 pcs+ delrin mini tool We are pleased to announce that after months of testing and hard work the sintered bronze bushings for the stepped pulley of Thorens 124 are finally available. Produced in Germany to our specifications, they are formed through the use of heat and pressure by pouring bronze powder into a mold cavity just like Thorens used to. The porosity of the bore and the self-lubricating property of the obtained part assures the constant presence of an oil film around the axle of the stepped pulley to maximize silent operation of such a crucial component of the “drivetrain” . Unlike the spare parts commonly available on the market that comply with ISO F7 specifications and allow an excessive clearance of 0.022 millimeters, our bushings have been carefully made to a production tolerance of 0.005 millimeters, which from our studies is the best value to avoid play and keep the stepped pulley silent and efficient. Impregnated with Shell synthetic turbine oil (22%), our stepped pulley bushings are supplied with a plastic punch to enable the end customers to perform the replacement quickly and easily. Please note that the bushings on auction are suitable for Thorens 124 series 1 and 2 with chassis mounted bushings only. Look closely at the pictures for reference. L asta si riferisce ad una coppia di bronzine sinterizzate, preimpregnate di olio. Non si tratta di comuni bronzine che si trovano in commercio con tolleranze F7 0.022 mm, ma di bronzine realizzate ex novo con tolleranze 0.005. Queste bronzine vengono realizzate con la realizzazione di uno stampo .Le caratteristiche sono identiche alle originale. insieme viene dato un punzone in plastica realizzato per la rimozione e l inserimento delle nuove.Prodotte in GermaniaBy Audiosilente Italy

Related Images: