* FLAT RATE SHIPPING COST $4.25 FOR ALL QUANTITIES ! PLUS ++++++ BUY 2 LOTS OR MORE & GET 10% OFF PRICE !! * FROSTED LED Lamp Kit for the Sansui 5000,5000A Model receivers. * Up for bid is brand new lot of (11) FROSTED WARM WHITE 6.3V-8V BAYONET DIAL LAMPS + (2) custom made to specification FROSTED Screw base LED lamps. (WARM WHITE) + (1) 5V-8V LED 3MM WIRE (Pointer lamp) = 14 TOTAL LAMPS !! * SCREW BASE LAMPS = FROSTED WARM WHITE LED 6V-8V * BAYONET LED LAMPS = FROSTED WARM WHITE LED 6.3V-8V * If you would like Green Lamps instead – check my store for kit available in Green lamps – (Sansui 5000,5000A KITS ) * ALL lamps are INDIVIDUALLY TESTED before it is packaged & shipped to you. * LED Lamp size: E10 SCREW BASE (WARM WHITE) * PLEASE CHECK YOUR UNIT TO INSURE PROPER FIT PRIOR TO ORDERING LAMP KIT !! ( Please see Photos we have provided for you ) * MOST important to me is giving my Customers the BEST PRICE, QUALITY, & PERSONALIZED CUSTOMER SERVICE !! * We GUARANTEE the quality of our product & will gladly issue a replacement or refund within 60 days of purchase if not fully satisfied !! * I welcome customized orders!! Contact me for any SPECIAL requests * Any questions or concerns please contact me BEFORE making any purchase!! ALL ITEMS WILL BE SHIPPED WITHIN 2-4 BUSINESS DAYS !!
Item Tag: 5000A
Vintage SAE Model 5000A Impulse Noise Reduction System
The Vintage SAE Model 5000A Impulse Noise Reduction System is a classic piece of audio equipment manufactured by the reputable brand SAE in the United States. This system is specifically designed to reduce noise and improve sound quality by utilizing specialized impulse noise reduction technology. Perfect for those looking to enhance their vintage audio setup with a touch of nostalgia and a trusted American-made brand.
Related Images:
SAE Impulse Noise Reduction System 5000A Replacement Faceplate Only! Read
SAE Impulse Noise Reduction System 5000A Replacement Faceplate You are bidding on a replacement metal faceplate only No actually unit included Faceplate has some scratches, scuffs B1
Related Images:
Sansui 5000A Complete Rebuild Kit High-Quality Receiver Recap Transistors
Up for sale here is this rebuild kit for the Sansui 5000A receiver. This includes all the parts you need to rebuild a Sansui 5000A, and includes the correct size replacement main filter capacitors. This does not include new lights or fuses. This also does not include the driver or output transistors. Correct replacement outputs are four MJ21196G, available here. Please don’t buy any of the Chinese transistors on eBay–those are counterfeit and may blow up. This kit includes replacements for all the electrolytic capacitors in the receiver, including the four large chassis-mount capacitors, which are replaced with new Epcos 3300 uf 100v caps. The new caps are the same diameter as the old ones so they will fit the old clamps perfectly. The kit also includes replacements for almost all the transistors on all the boards except the tuner board. Transistors frequently age worse than the capacitors, so you have to replace them when you’re doing a rebuild. Replacements for the driver board trimmers and a number of diodes are also included. There are two different versions of driver boards in the 5000A–some have the older F-1040 boards and some have the newer F-6013 boards. This kit comes with parts to rebuild the F-6013 boards by default, but I can swap those out for the parts to completely rebuild the F-1040 boards if you have those, just let me know. These are all high-quality brand new genuine parts, the same ones I use when I rebuild vintage equipment. Capacitors are Nichicon PW, Nichicon Muse, Panasonic FC, Wima film, and Epcos for the chassis-mount caps. Transistors and diodes are Fairchild/Onsemi. This kit includes a total of 115 parts. The parts for each board are individually bagged for ease of installation, and the instructions will tell you how the transistors and diodes go in, but there are a LOT of parts to replace here, so if you do not have a lot of experience with vintage gear I would not recommend starting with this one. You should know what you’re doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester with 60W or 100W incandescent bulb. I would recommend a a desoldering gun such as a Hakko FR-301, but it’s not absolutely necessary. Please see my pictures for details. US shipping and handling is $10, and international is $28. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use “add to cart” on everything you want and then check out for combined shipping.