Item Tag: 14 Days

Concept 16.5 receiver rebuild restoration recap service kit fix repair capacitor

The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Nippon / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Nippon audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

Nikko NR-715 capacitor receiver rebuild restoration upgrade kit repair

The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Nippon / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Nippon audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

Atelier Rullit field coil full range speakers AERO 10 FC Telefunken coils + PSU

Neue Seite 1 Here’s another offer from Atelier Rullit: A pair of AERO 10 field coil full range speakers – a must-have for the reproduction of unplugged instruments, as played in acoustic jazz or whatever kind of chamber music, and the reproduction of the human voice in opera or musical. In that construction we have used pre war original Telefunken field coils, highly matched – two pieces from approx. 40. They are suitable to play in open back cabinets, open baffles and front loaded horns. In a 2-way combination they are fine for all kinds of music including rock and full sized orchestras. Here are some technical facts: The outside diameter is 250 mm, 7.3 ohms voice coils, 1.7 kohms field coils (high matched original Telefunken), 160 VDC max, Fs 40Hz free air, 32Hz on a front loaded horn. The weight is 4.8kg each. Breath taking sounding drivers. * * * To add a few more thoughts on this matter, I would suggest to compare a ferrit magnet to mere tap water, an AlNiCo to the kind of premium mountain water being offered in supermarkets, whereas field coil represents the water you take directly from its origin somewhere in the woods – refreshing and rich in taste. Just close your eyes and try to imagine their undoubtedly different qualities. Please feel free to ask any question that may arise. This is a really rare opportunity to purchase a unique pair of speakers “hand made in Germany”.

Related Images:

Pioneer SX-1000TW PARTIAL rebuild restoration recap service capacitor kit repair

Please note we also offer a FULL kit with INSTRUCTIONS ———–> LINKOr search for item (eBay item number:155126510480)The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Nippon / United Chemi) electrolytic capacitors.2. Complete audio path upgrade with high quality US made (IC) or Nippon audio grade film capacitors.3. Parts for compete recap of all the electrolytic capacitors. 4. Complete recap of all PCBs. 5. Transistors (PNP, NPN). 6. fuse/s 7. Diodes Please note this kit does not come with any instructions. If you need instructions, see the link below for a full kit. A FULL kit with INSTRUCTIONS & SUPPORT ———–> LINK We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

1920’s Radio Loop antenna wire 18 Awg 19/30 stranded DeForest Green by the ft.

Offered for sale: New production emerald green, cloth covered, loop antenna wire custom made for the DeForest loop antenna and if you desire a different look… on the RCA Radiola 25, 28 as well as others. NOTE: SOLD in 1 Foot lengths of greater than (>) 10 feet …ENTER NUMBER OF FEET for total continuous length desired. The wire is 18 AWG (19/30) served with polyester yarn to closely approximate the original. The served wire has an OD of 1/16″ or, 0.060″ or, 1.5mm. The Radiola 25 and 28 loops take approximately 75-90 feet to rewind. The DeForest loop takes similar length approximated 88 feet. To our knowledge, no loop was manufactured with Litz wire. I last made this wire over 10 years ago and halted production after moving. I offer this wire in gold, tarnished copper, emerald green, and brown. Other custom colors available upon request. Proudly made in Lititz, PA. Thanks for looking. Minimum order is 5 feet. Orders of less than 5ft will not be accepted and will be cancelled!

Related Images:

Goldstar 5 inch TV B&W AM/FM Radio AC Powered 1986 Television

CONDITION: Pre-Owned. Tested and works. Lights up. Made in 1986 South Korea.Please review all photos for condition. If there are any questions about the item listed that the description or the pictures don’t answer, please send us a message and we will do our best to answer you. Any new information either received or discovered during the auction or duration of an item, we will update the listing. We describe each item to the best of our ability and occasionally mistakes can be made in the listing as we are only human.We work 9 am – 5 pm EST from Monday to Friday to list, ship, and answer questions about our items for sale so please be patient with our responses.WE DO NOT ACCEPT OFFERS ON AUCTIONS; PLEASE WAIT FOR THE AUCTION TO END BEFORE SENDING US ANY OFFERS.WE DO ACCEPT OFFERS ON BUY-IT-NOW ITEMS.PAYMENTS: All payments must be made within seven days after the auction has ended. If this is a problem or you are bidding on another item that has not ended please let us know, or a nonpayment case may be opened. We do combine multiple items to save on postage.Please be advised that all New York residence must pay sales tax unless you have a Resale Certificate which would require a ST-120 form to be filed with us. SHIPPING: We will ship all items the cheapest way possible unless asked otherwise. We do combine shipments and discount shipping charges for multiple purchases, but please WAIT for a revised invoice before making any payments. We try to ship every day, although sometimes every other day. We take the time to package every item with care so that it makes it to you in the same condition as it was listed.We are NOT responsible if the Post Office or UPS loses or damages a package that is NOT insured. Insurance if desired is extra! – On items over $100.00 we recommend taking the insurance. If you don’t buy insurance and item is damage during shipping we can’t guarantee a full refund for returned items. **INTERNATIONAL BIDDERS: Due to numerous fraudulent and suspicious transactions we will only ship through the EBay Global Shipping Program to international buyers. Communication: We ask that you please contact us first before opening a case with eBay. We guarantee that we will make you satisfied with our products or services. We promise a timely response to any problem you may have.RETURNS: Returns are accepted on all domestic shipped items unless stated otherwise. We are not responsible for return shipping charges unless there was an error in the listing of the item. A refund will be sent as soon as we receive the item back. We ask that you please look at all photos and read descriptions closely before bidding.

Related Images:

Genuine Cerwin-Vega DT3 tweeter diaphragm NOS AT-8, AT-10, Re30 speakers

Genuine Cerwin Vega tweeter diaphragm for DT3 tweeter, used in AT and RE series. If your tweeter is blown, this will fix it. Easy to do. Take out your tweeter, lay flat, and remove the two small screws that hold the magnet to the plastic frame. Lift the magnet straight up. These kits come with new gaskets, but if the gasket sticks to the magnet (which it usually does) you can just leave that one on. No real need to change it. Then LOOK at the way the diaphragm is in your old tweeter. The round plastic holder has a thinner tab toward the outside edge, and thicker one toward the inside. You’ll see what I mean. Pop out the old plastic ring. Sometimes the old mylar (chrome dome piece) will stick to the frame. No worries, it’s shot anyway, just yank it off. Put the new diaphragm in the frame just like the old one came out. Now, the only part you have to be careful on. Slowly lower the magnet back over the new diaphragm. Best to look straight down on it, and keep the screw holes lined up. Then put the two screws back in, and you have a new tweeter ready to get back to rocking. Yay! 19 years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks! (Note:I will be away from noon July 16th to July 20th. Any purchases made will be shipped promptly on the 21st!)

Related Images: