Item Category: Vintage Electronics

Heathkit AR-1500 receiver restoration kit service recap capacitor fix rebuild

The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Panasonic / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Panasonic audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

Heathkit AR-1500 Complete Rebuild Kit High-Quality Receiver Recap Set

Up for sale here is this rebuild kit for the Heathkit AR-1500 receiver. This includes replacements for all electrolytic and tantalum capacitors in the AR-1500, and includes new main filter capacitors and new mounting clamps, as the old ones are much too large. This kit is for the AR-1500, it will not work for the AR-1500A. Unfortunately I do not have access to a free service manual, but you shouldn’t need it for the rebuild. New capacitors are Supertech axial, Nichicon PW, Nichicon KL, Nichicon Muse, one Vishay safety disc cap, and two Nichicon LS 6800 uf 80v main filter capacitors. All axial capacitors are replaced with new axial capacitors except the 2 uf 70v caps, which are replaced with new radial Nichicon PW 2.2 uf 100v caps, and the bipolar 250 uf 4v caps, which are replaced with new radial Nichicon Muse 220 uf 10v bipolar caps. Most new capacitors will go higher in voltage compared to the originals. Some new capacitors will have minor capacitance changes (500 uf replaced with 470 uf, 250 uf replaced with 220 uf, 2 uf replaced with 2.2 uf). All tantalum capacitors are replaced with low-leakage Nichicon KL caps. The new main filter caps are Nichicon LS 6800 uf 80v caps, and include new mounting clamps. You may need to drill holes in the chassis to mount the new clamps. These are all high-quality brand new genuine parts, the same parts I use when I work on vintage stereo gear. I will include surprisingly well-written instructions, but this is moderately complicated, and you should know what you’re doing and have a decent soldering iron and a dim-bulb tester with a 40W, 60W, or 100W incandescent bulb. This kit may not fix your receiver, but it’s pretty likely that it will, and it will definitely help it run better. Please see my pictures for details. US shipping and handling is $8, and international is $28. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use “add to cart” on everything you want and then check out for combined shipping.

Related Images:

Sansui eight 8 rebuild restoration filter capacitor transistor kit fix repair

The scarcity of good, honest techs who can do good and reasonably priced restoration/rebuild of audio equipment inspired me to create this restoration kit. In today’s day and age, it is difficult to find a knowledgeable technician who can service your audio gear properly. I have seen many poor quality restorations of equipment that cost way too much for their owners. In 99% of the cases, only a few parts were replaced, instead of a full and proper restoration job.A proper restoration must replace all electrolytic capacitors on all boards. Do not fall for partial kits that restore just one PCB (power supply, power amp, etc.). This is not a good or proper way to restore your audio equipment. It is the same as with car tires; one should never replace just one tire and keep the other worn-out tires on. A proper rebuild requires a full recap of all PCBs.On the other hand, if one succeeds in finding a good tech, the wait time is usually 6-12 months for the unit to be serviced, and costs are sky-high. I have been servicing audio equipment for many years and have developed deep respect for all good equipment. Knowing how amazing and warm these units can sound, I decided to put together this kit. It includes very good upgrades and improvements that must be done to the unit. This restoration kit will make a huge difference in the sound quality. All the parts are of high-quality Japanese Nichicon / Rubycon / IC / United Chemi capacitors.I am extremely particular about the quality of the parts provided in this kit. Knowing how many bogus/fake caps, diodes, resistors, etc. are out there, I source all the parts from reputable wholesalers and buy them in bulk. Vintage audio equipment has the potential to deliver rich and authentic sound when it is properly restored. Not only can it enhance your listening experience, but it can also evoke memories and bring joy to your life. Let’s work together to bring your vintage gear back to its full potential, and make sure you have the music you deserve. ♩♬♫♪♫♩♬ “They Shall Have Music”- Avery FisherIncluded in this kit: 1. Power/Filter stage capacitors (Nichicon / Nippon / United Chemi) electrolytic capacitors. 2. Detailed instruction with colorful images, schematics, manuals (all of these are in electronic form, I consider these much better than printed version due to zoom availability). 3. Schematics 4. Complete audio path upgrade with high quality US made (IC) or Nippon audio grade film capacitors. 5. Parts for compete recap of all the electrolytic capacitors. 6. Complete recap of all PCBs. 7. Transistors (PNP, NPN). 8. fuse/s 9. Instructions on how to clean the chassis. 10. Instructions on how to clean a faceplate 11. Instructions on how to polish knob covers. 12. Support/help to a reasonable extend in case you need it. (This is what makes us different from other sellers.) We also offer a great selection of restoration kits, LED conversion kits, volume controls,switches and other rare and unique parts; Make sure to check it here ———–> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images:

Sansui 8 eight receiver replacement front LED lamps bulbs lights kit set

Please note we also offer a FULL kit with INSTRUCTIONS ———–> LINKOr search for item (eBay item number:155126516017) As someone who has serviced many various vintage audio equipment for a considerable amount of time, I have developed a deep admiration for good quality gear. However, I have noticed that many of these units suffer from constantly failing incandescent bulbs, resulting in wasted money on services to replace them time and time again. After years of dealing with this issue, I decided to take matters into my own hands and develop an LED replacement that would match the color temperature and angle of the light. Through my research and collaboration with a manufacturer of LED bulbs, I was able to develop a perfect replacement that not only matches the color temperature but also offers a 360-degree lighting angle compared to the 120-degree angle of regular LED bulbs. This LED replacement has the correct voltage and is sure to save users time and money in the long run. I am thrilled with the results of my efforts and confident that this LED replacement will be a game-changer. Say goodbye to constantly replacing incandescent bulbs and hello to the reliable and efficient lighting of LED technology. The kit contains lamps as follows: 5 x 6.3v dial/meters fuse lamps 8 x 7v (5mm) lamps – indicators. Bi-pin wired 1 x 3mm bi-pin 7v wired lamp – pointer 1 x bayonet lamp 1 x bi-pin lamp 60000 hours working time. Color – warm white. FULL kit with INSTRUCTIONS ———–> LINK We also offer a great selection of Restoration Kits, LED conversion kits, Volume Controls, Rotary Switches and other rare/unique parts;Make sure to check our store ———> LINK (Use the search bar inside the shop to find what you need faster)We may also be interested in purchasing your equipment

Related Images: